Electronics
Showing all 30 results
-
Reg. $4.99 Save $4.00
16 feet of red, black, and green. UL approved electrical tape.
3 pack
-
Reg. $59.99 Save $20.00
The RAM-B-111 consists of a double socket arm, 2.5″ diameter round base and 6.25″ x 2″ rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
-
The X4 Probe gathers trolling speed and water temperature from the depths and uses a sonar signal to send that data back to the boat. Replacement probe for X2 and X4 System. Backwards compatible with Model 840.
-
Connects the downrigger weight to the Fish Hawk Probe. Two heavy-duty snap swivels connected by a Mighty-Mini™ split ring. The split ring will pull apart with approximately 80-pounds of pressure in the event the downrigger weight snags on the bottom. Overall length 6″. Sold 2-per pack.
-
HELIX 5 CHIRP SI GPS G2 | HELIX 5 Series | 410230-1
The HELIX 5 CHIRP SI GPS G2 with our new user interface and operating system, features a brilliant 800H x 480V, 5″ 256 color display with backlight. CHIRP Side Imaging/Down Imaging and DualBeam PLUS sonar with 4000 watts PTP power output, Precision Internal GPS Chartplotting with built-in UniMap cartography with a micro SD card slot for optional maps or for saving waypoints. Maximize your angling experience with the Humminbird HELIX 5 CHIRP SI GPS fishfinder GPS system.
CHIRP Frequencies (Out of Box Transducer)
83 kHz: 75-95 kHz
200 kHz: 175-225 kHz
455 kHz: 420-520 kHzMaximum Depth: 1500 feet
-
Every species of fish has a preferred water temperature range they are most comfortable in. Find that temperature range and find the fish!
The Fish Hawk TD reveals water temperature at depth. Attach the TD to a weighted fishing line and lower it to the bottom. Retrieve the TD to see the water temperature every 5-feet. Temperature and water pressure sensors sample multiple times per second for unmatched speed and accuracy.
-
The X4D Probe gathers water temperature, trolling speed and depth information at the downrigger ball and uses a sonar signal to send that data back to the boat. The on-board water pressure sensor provides true depth information. Replacement probe for X4D System. You must have the Fish Hawk X4D Display to view probe depth.
-
$200 MAIL IN REBATE – NOW THROUGH DECEMBER 31ST, 2020!
CLEARLY THE MOST AMAZING SONAR TECHNOLOGY EVER
You’ve never fished like this before, with a view below your boat so clear you even see your lure as you retrieve it.
Who wouldn’t want stunning, real-time imagery below and around their boat?
Need a new view? No sweat. This transducer is easy to adjust.
Up to 200’ down. Up to 200’ away. That’s an impressive view for real-time sonar.
Even if the waters are rough, this system stabilizes the view on your chartplotter screen.
No matter your setup, the simple plug-and-play connector makes install a breeze.
-
See fish and structure in maximum detail when you pick your display color, your location and your sonar for your day on the water with the STRIKER Vivid 4cv fishfinder with transducer.
The sonar color you pick says a lot about your fishing style. Good thing there are 7 new vivid options.
What a view. Use the included transducer to get CHIRP traditional and ClearVü sonars.
Never lose a hot spot again. Use waypoint marking to find your way back.
What’s under the water’s surface looks pretty good as 1” contours, just saying.
-
InReach Mini is your go-to connection for maintaining off-the-grid contact. It’s our palm-sized satellite communicator for adventures where size and weight matter.
-
Save $4.00
The RAM-202U consists of a 1.5″ diameter rubber ball connected to a flat 2.5″ diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
-
Thermoplastic rubber bumper fits over the front of X4 Probes to protect the thermistor tubes from impact damage.
-
Reg $29.99 Save $10.00
- 6 ft cable
- Humminbird Plug on one end
- Soldered Bare wire leads on one end for extending reach
- Connect power to fuse panel or in-line fuse holder(not supplied)
-
Save $10.00
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. This bracket is a direct replacement for the MKA-16-02.
-
Save $7.00
Heavy-duty trolling motor connector has a positive snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included).
-
Save $5.00
Monitor the voltage level and “state of charge” of any 12-volt battery with an LED display that indicates full, 2/3, 1/3 or 0 “state of charge”. Easy to store anywhere.
-
Save $10.00
Protects boat trolling motor wiring from electrical damage. Features a 60 amp rating with manual reset. Fully waterproof. Compatible with all 12-, 24- and 36-volt systems.
-
Save $10.00
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.
-
Save $3.00
Quickly, easily remove or replace your prop with this kit. A crescent wrench is required for installation.
-
Save $10.00
MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you’ll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor.
-
Save $26.00
MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you’ll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3 or G3N fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.
-
Save $10.00
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Garmin fishfinder with a Universal Sonar 2 transducer on your trolling motor.
-
Save $15.00
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. Included with the mount is the Track Ball™ base for connecting to any kayak track system including the RAM Tough-Track™. This unique design provides a universal solution for virtually any kayak as well as any transducer. The RAM transducer arm mount is compatible with all transducers that contain a 1/4″ screw.
-
Save $10.00
The RAM-B-101 consists of a double socket arm, 2.5″ diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the bottom of the Garmin echo™ and Striker™ 4 Series. Designed into the mount is a 1″ diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM’s rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo™ to the RAM Mount.
-
Save $10.00
The RAP-B-138-GA48 consists of a 2.5″ diameter round base with the universal AMPS hole pattern, double socket arm, diamond adapter base and high strength composite cradle. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
(device shown in picture, not included)
-
Save $4.00
The RAM Track Ball is made up of a C size 1.5″ rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball.
-
Save $20.00
The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
-
3.5-inch CHIRP Fishfinder with GPS
- Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
- Find fish; mark and return to hot spots, docks and ramps
- Convenient keypad operation
- Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
-
4” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes dual-beam transducer with Garmin CHIRP traditional sonar for crystal-clear images and remarkable target separation
- Built-in Garmin Quickdraw™ Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 4.3” display and intuitive user interface
- Rugged design for every fishing environment
- One 4-pin transducer port
- Quickdraw Contours
- Integrated GPS
- Mark Waypoints
- Course over Ground (COG)
- Current draw @ 12V: 0.23A
-
Regular Price $59.99 Save $10.00
The RAM-111 consists of a 2.5″ diameter round base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25″ x 2″ rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more
Showing all 30 results