Winter Hours: 6am-7pm Every Day!

Planer Boards & Accessories

Showing 1–24 of 33 results


  • Each Yellow OR12 Side Planer includes a stationary red flag, one OR19 (orange) release, one OR16 (red) clip, two 6/32 screws, two nylon nuts, one split ring, instructions and is carefully ballasted to run flawlessly in rough water off of your rod line. Ideal for Walleye and most fresh water fish.

    Select options
  • Off Shore Tackle OR12TF Tattle Flag™ Upgrade Kit
    (For use on OR12L, OR12R, OR31L, and OR31R)

    Each kit includes red flag, two OR16 clips, wire, spring, washer, screw eye, split ring, 6/32 screw and instructions. One kit will upgrade one OR12 or OR31 Side Planer. This item is ideal for light biting fish. The flag will pull down when you have a fish on or if you are fouled in weeds.

    Add to cart
  • Off Shore Tackle Snapper Adjustable Planer Board Release with a wider range of tension settings this release. It is ideal for Walleye, Salmon, Steel-head, Trout, and Muskie.While trolling the great lakes. For use with super lines, lead core, as well as mono-filament. This release is made to attached to the bracket with of our OR12 or OR37 planer boards by using the cap nut that came with your boards. You adjust the clamp pressure by tightening or loosening the adjustment screw. You can move adjustment screw in the manner you prefer to secure your line. Easy to follow directions on the back.

    Add to cart
  • Off Shore Tackle’s Pro Snap Weight Clip is a half size clip with an extra heavy spring tension. You simply position your fishing line behind the pin that protrudes through the center of the pads to hold your snap weight securely on the line. This item is ideal for use with snap weight fishing and super braid lines. You can also use this clip on the OR12 and OR31 Side Planers.

    Pack of 2 clips with split rings.

    Add to cart
  • Opti Tackle Ultimate Planer Board with Spring Flag System was designed by Zach Dangle of Grand Rapids Guide Service. This board has very feature that you need while running planer boards. From the bright green color for visibility to the extra wide clips for better holding power. This board has it all. The spring flag is included with this kit.

    Select options
  • Off Shore Tackle Tadpole Resettable Diving Weight offer the trolling angler a simple and easy alternative to using traditional downriggers and divers to get lures down to mid level depths. The design of the in-line Tadpole features a flat faced trolling weight with two coast lock snaps. When you set your lure out, the face of the Tadpole points downward, and the coast lock stays at the top of the arm in the clipped position. When a fish strikes, the coast lock slides down the arm into the tripped position, so you easily fight the fish and not the resistance of the diving weight itself. These diving weights are 99% lead free and feature a durable black powder coated finish.

    Off Shore Tackle Tadpole Diving Weights are highly effected by speed. Slight fluctuations in speed can dramatically impact the running depth. Going slower will cause these Off Shore Tackle Tadpole Diving Weights to run deep whereas going faster will cause them to rise and run shallower. This also applies to turns, the inside rods will run a little deeper and the outside rods will run a little shallower.

    Select options
  • A package of 2 black brackets and 1 RED & 1 GREEN LED Light

    Fits most boards including most big boards. No need to drill through board simply attach brackets w/ included set screws & Allen wrench.

    LED Light attached to a Planer Board. (Planer Board not included)

    Add to cart
  • Light stick feature for night fishing. Extra wide clips for better hold. Lighter than other boards. 1 per package. Choose from left or right.

    Select options
  • This release comes as standard equipment on the OR34 Mini Planer Board and is ideal for light biting fish such as Walleye or smaller fish using 10-25 pound test monofilament line.

    Add to cart
  • The TX-22 Special is a proven tournament winner and is now available in a Pro-Pack!

    Add to cart
  • Choose Port or Starboard

    With Church Tackle’s TX-6 mini planer board, you can use lighter tackle with an inline planer board. The clip will hold braided, fused, lead core and monofilament lines. Although it is small in size, this board will still take your lure out where you want it. The TX-6 mini planer board is great for Walleye, Steelhead, Bass, Crappie and Bluegill. Add these little boards to your fishing arsenal and maximize your fishing potential!

    Select options
  • Lightweight at 4.5 ounces. Spring Loaded Retaining Pin. Adjustable Flex Clip. Airfoil Design Lifts over Big Waves.

     

    Select options
  • Add to cart
  • This release is ideal for dual and triple planer board trolling for Walleye and Salmon using 10-25 pound test monofilament line. This is the release most commonly used for rigging add-a-lines or fixed slider lines among downrigger anglers.

    Add to cart
  • Pro-Pack includes 1 Walleye Board Starboard, 1 Walleye Board Port and two Double Action Flag Systems.

    Add to cart
  • The TX-22 Special sets upright without forward motion, which gives it the ability to troll extremely slow without restricting performance at higher speeds. The TX-22 Special is also reversible allowing flexibility to your fishing needs. The TX-22 Special has the same patented clip and rear pin that makes Church Tackle planer boards the #1 choice. THE MOST PERFECTLY BALANCED PLANER BOARD ON THE MARKET.

    • Double Action – Runs either Port or Starboard
    • Flag Included
    Add to cart
  • Church Tackle TX-12 Planer Board Flag System was designed specifically to clip on to TX-12 planer boards. This system has 11 different settings which can be manipulated to increase your bite sensitivity greatly.

    Add to cart
  • Now you can set the lure down to the desired depth and maintain the depth at any distance you choose behind the boat.

    It’s great for trolling in congested areas and for more effective contour trolling along drop offs, contour lines, reef edges and weed lines in rivers, lakes or the ocean.

    Take advantage of the prop wash, which moves disoriented bait-fish, sediment and bugs around that attract fish.

    Although it’s primary use is as a stern planer, it can also run off of outriggers or be used as a buoy marker.

    In addition, the TX-005 may be used to take the memory out of mono line that has been spooled a long time on a reel

    Features:

    • allows you to cover more water by staggering lines out the back of the boat
    • produces such a slight drag, that you can still see the action of the lure at the rod tip while anchored, fishing the river current
    •  easy to use clip and quick snap provides speedy and simple attachment or removal
    • 7″ long, weighs approx. 1.5 oz.
    • effective for all species including: walleye, pike, musky, salmon, trout and panfish
    • suitable for fresh and saltwater fishing
    Add to cart
  • Replacement pads for OR1, OR2, OR3, OR3BWW, OR4, OR7, OR8, OR17BWW, and OR30BWW releases. You will also use this replacement pad on the clips that originally did NOT have the pin protruding through the center of the pad.

    Add to cart
  • Reg $16.99        Save $2.00

    The Church Tackle Lock-Jaw Clip fits the TX-12, TX-22, TX-44 and the Walleye Board planer boards from Church Tackle. It is also designed to fit side planers made by other companies as well as drop-weights and many other applications. The replaceable pads hold great on all lines including mono, super braids, power pro, lead, wire, and copper lines while not damaging the line. The Church Tackle Lock-Jaw Clip is designed without a spring that could possibly weaken or lose tension. The clip clamps down with a simple twist of the lever and only fine adjustments are needed for more or less clamping pressure.

    Add to cart
    • Perfect for lighter tackle
    • Lightweight design rides over waves with ease
    • Ball-bearing clip will not wear out
    • Idea for 14 lb. braid or 8 lb. mono or larger
    Select options
  • Church Tackle’s Replacement Rear Pin Assembly includes a super tough nylon pin and spring. Fits the following planer boards: TX-22, TX-12, TX-6 and Walleye Boards.

    Add to cart
  • Save $2.00

    High quality flag made from super tough nylon. Stainless Screws.

    Add to cart
  • Fully assembled, no tools required!  Includes flag system & E-Z Store.

    Made in the USA

    The E-Z Store makes it easy to store your boards.  Slide tow-arm & clip into bracket with clip up.  Just slide the tow-arm & clip off for storage, then simply slide back on when you’re ready to fish again.

     

    Select options

Showing 1–24 of 33 results

Cart

Filter by price