Store Hours: Mon. thru Sat. 6am-8pm; Sun. 6am-5pm. Christmas Eve 6am-4pm; CLOSED Christmas

light

Showing all 17 results


  • Reg. $7.99              Save $2.00

    • Surface mount 3 diode light with reflex
    • Snap-On, replaceable lens
    • Hardwired with lead and ground
    • Acrylic lens, black ABS housing
    • Available in Amber or Red.
    Select options
  • Attwood offers a variety of durable stowaway combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above the trolling motor, anchor, or other equipment on the bow. When not in use, lights can be removed from base and stowed, so they won’t interfere with fishing or anchoring.

    One-mile, 225° red/green light visibility for boats up to 39.4 ft. (12 meters). Includes 8-watt wedge base lamp. The locking collar poles offer “Universal Fit” because customers can use them with a wide variety of Attwood 2- and 3- pin straight or angled bases.

    Add to cart
  • Reg. $19.99                  Save $5.00

    304 stainless steel with a plastic body and watertight lamp socket. The Round transom light body is translucent so it shines on both sides of a bulkhead! It can be used to light an interior compartment and may also be used as a cockpit courtesy light. Rubber gasket seals lens and body to mounting surface. Includes one 7.5-watt lamp and two stainless steel #10 screws. Patented design. Light provides 2-mile, 135° transom visibility for pleasure craft up to 164 ft. (50 meters) in length.

    Add to cart
  • Be seen and be safe with these small LED lights that shine much brighter than larger lights, while using up to 90% less energy. Multiple mounting options for horizontal and vertical attachment and easy to remove. Kit Includes: Red/Green LED bow light, White LED stern light, Quick-release mounts, Hardware Requires: 3 “AAA” batteries per light (not included)

    Add to cart
  • Camco Trailer Light Kit with Side Markers is ideal for utility and boat trailers, as it is submersible. The self-grounding design allows installations without wiring dedicated ground circuit to each light. Meets DOT standards for trailer widths less than 80 inches. Includes: (2) stop/tail/turn lights with side markers, (1) license lamp, (2) amber side markers, (1) 22′ split Y-style harness with connectors and fastening hardware, (1) license plate bracket.

    Add to cart
  • This kit includes two multi-functional submersible trailer lights, license plate bracket, 25-foot wiring harness and hardware.  It includes the 8-function light of stop, light, turn lights.  the lenses are impact resistant with the latest LED technology.  This product confirms to applicable US FMVSS and Canadian CMVSS.

    Add to cart
  • The LED Single Dome Light Replacement Kit is 160 lumens and 12 Volts. Great for replacing the dome light in your marine or recreational vehicle. Light is a warm white.

    Add to cart
  • Reg. $7.99              Save $2.00

    • Snap-on, replaceable lens
    • Surface mount white base
    • Mounts on 3″ centers
    • Lens with reflex eliminates need for separate reflector
    • Includes both lead and ground wire for mounting to all surfaces
    • Available in Amber or Red.
    Select options
  • Reg. $9.99              Save $3.00

    Optronics International is a premier worldwide manufacturer of industrial and commercial vehicle safety lighting products. The company specializes in interior and exterior LED and incandescent lighting for the HD, trailer, RV, marine, and transit vehicle markets.  Available in Amber or Red.

    Select options
  • Reg. $24.99              Save $5.00

    Sonically-sealed, impact-resistant poly-carbonate lens and housing ensure a waterproof module. Meet or exceed all applicable state and federal regulations specified for vehicles 80″ wide or wider. Three sealed poly-carbonate lamps on 6″ centers lead to a stainless steel base completing the best line up of waterproof light bars available today.

    Add to cart
  • Reg. $9.99              Save $3.00

    The sealed LED trailer marker/clearance light from Optronics includes a single waterproof, P2-rated light and grommet. Designed to withstand the weather. Easy installation. Measures 1.09″ x 1.09″ x 0.9″.

    Add to cart
  • Reg. $14.99              Save $5.00

    2-9/16″ x 1-1/4″ Rectangle. Incandescent trailer light illuminates your license plate when properly mounted. Durable chrome-plated housing. Gasket helps create a weathertight seal. Surface mount to trailer. 2-Wire design.

    Add to cart
  • Reg. $5.99              Save $2.00

    Stud-mount license plate light features polished, chrome-plated housing. Single wire design grounds through mounting stud. Replaceable bulb. 2-5/8″W x 1-9/16″H x 2-3/16″D.

    Add to cart
  • Reg. $27.99 – $39.99             Save $6.00 – $12.00

    LED RV combination tail light, driver side with license illuminator or passenger side, white base, 12 volt system.

    Select options
  • Reg. $11.99              Save $2.00

    Surface mount rear combination tail light, Available with or without integral back-up light, Popular for RV applications

    Add to cart
  • Reg. $69.99              Save $20.00

    Kit Includes: License Plate Bracket, 25-ft Harness and Stainless steel mounting hardware

    Designed for 12V Systems

    Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed

    Waterproof construction, low profile design

    Acrylic lens, corrosion proof plastic housing

    Includes separate ground wire with eyelet

    Mount on 2″ centers

    Passenger side light is 7-Functions: Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, and Side Reflex

    Driver side light is 8-Functions: Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, Side Reflex and License Illuminator

    Size: 8.063″ x 2.875″ x 2.813″

    Add to cart
  • What is the Attwood difference, Value and ingenuity. For more than 100-years Attwood has been proud to serve the parts and accessory needs of the marine industry. We have partnered with you to design, manufacture, test, and distribute a complete line of products that have been a part of your tradition, and we thank you for this opportunity.

    12-Volt low ampere draw LED
    Above water line surface mount installation
    Interior applications

    Available in 4″, 6″ or 8″

    Select options

Showing all 17 results

Cart

Filter by price