Description
1 Per package
LFF311
Store Hours: Monday thru Saturday 6am-8pm; Sunday 6am-5pm! CLOSED Thanksgiving.
$1.00
The Lindy Foo Flyer Ice Jig has a cool, hovering and gliding action when you jig it up and down. It’s got some “thump’ when it hits the bottom to get the fishes attention. Tip with your favorite live bait or soft plastic offering.
Out of stock
1 Per package
LFF311
Off Shore Tackle Tadpole Resettable Diving Weight offer the trolling angler a simple and easy alternative to using traditional downriggers and divers to get lures down to mid level depths. The design of the in-line Tadpole features a flat faced trolling weight with two coast lock snaps. When you set your lure out, the face of the Tadpole points downward, and the coast lock stays at the top of the arm in the clipped position. When a fish strikes, the coast lock slides down the arm into the tripped position, so you easily fight the fish and not the resistance of the diving weight itself. These diving weights are 99% lead free and feature a durable black powder coated finish.
Off Shore Tackle Tadpole Diving Weights are highly effected by speed. Slight fluctuations in speed can dramatically impact the running depth. Going slower will cause these Off Shore Tackle Tadpole Diving Weights to run deep whereas going faster will cause them to rise and run shallower. This also applies to turns, the inside rods will run a little deeper and the outside rods will run a little shallower.
Church Tackle TX-12 Planer Board Flag System was designed specifically to clip on to TX-12 planer boards. This system has 11 different settings which can be manipulated to increase your bite sensitivity greatly.
Opti Tackle Ultimate Planer Board with Spring Flag System was designed by Zach Dangle of Grand Rapids Guide Service. This board has very feature that you need while running planer boards. From the bright green color for visibility to the extra wide clips for better holding power. This board has it all. The spring flag is included with this kit.
Replacement pads for OR1, OR2, OR3, OR3BWW, OR4, OR7, OR8, OR17BWW, and OR30BWW releases. You will also use this replacement pad on the clips that originally did NOT have the pin protruding through the center of the pad.