Description
- Connect sewer hoses with no tools
- Comfortable thumb grip for tightening
- 3 inch clamps
- Rust resistant and made with UV stabilized resin
- Pack of 2
Home » Shop » Camping & RV » RV » CAMCO RV SEWER HOSE TWIST IT CLAMPS
$5.99
Camco Sewer Hose Twist-It Clamps make fast work of connecting sewer hoses to fittings. No tools required-just position the clamp and twist the convenient thumb grip to tighten. Durable construction features 3 inch rust-resistant clamps and UV stabilized resin thumb grips.
In stock
Save $5.00
Change a flat trailer tire anywhere, any time without help, without a jack, and without unloading your trailer. Provides a 4 1/2″ lift, holds up to 15,000 lbs., lightweight and strong, water and rust proof, cross mesh bottom for use in soft ground and gravel, traction treads on ramp and traction teeth on bottom for sure gripping.
The RhinoFLEX Bayonet Fitting with Locking Ring is designed for use with RhinoFLEX sewer hose, and connects to any RV, lug fitting or dump tank. The four bayonet prongs and built-in gasket provide a secure, odor tight connection. Bayonet fitting swivels 360 degrees for easy connection, and the included locking ring is a non-permanent accessory, so you can use or remove it as needed. Stores in a 4-inch square bumper.
The locking ring and the bayonet fitting are threaded in opposite directions and twist together. To securely attach the locking ring and bayonet fitting, twist the black locking ring in the unlock direction down the hose 5 or 6 inches. Then, screw on bayonet in the ‘tighten’ direction until it stops. Once the fitting is set, twist the locking ring back up the hose in the lock direction until the teeth at the top of the ring are firmly attached the fitting. There are arrows on each part indicating which direction to turn it. Always make sure to test the fittings and locking rings for a tight fit before emptying your tanks.
Replace lost or damaged RV bumper caps with Camco’s No Insect RV Bumper Caps featuring small vent holes and squeeze grip for easy installation and removal. Having several small vent holes instead of one big hole allows for ventilation while keeping flying and nesting insects out. Ridged sides will help prevent the bumper cap from coming loose while driving down the road. Constructed of durable polyethylene and comes in a pack of 2. The caps fit standard 4” square RV bumpers.
he Camco RhinoFLEX 45 Degree Sewer Hose Swivel Fitting securely connects to your RV waste valve fitting, creating an easier angle of access for emptying your black and grey water tanks. The four-prong bayonet fitting securely attaches to any lug fitting, and the lug end is compatible with any bayonet fitting. Each end swivels for easy connection and features a built-in gasket for an odor-tight connection. The 45˚ elbow is clear, so you can see when your tank is empty. The 45˚ Sewer Hose Swivel Fitting is UV-resistant and made in the USA.
The bayonet end of the 45-degree fitting easily swivels and securely attaches to the standard lug fitting located on your RV or trailer’s waste valve. The 45-degree elbow will help provide an easier angle of access for emptying your tanks. The lug end is the same as the lug fitting on your RV’s waste valve, so you can attach your sewer hose to the lug end as usual.